UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION

Abstract

In this investigation feasibility of Beech slabs in particleboards production were prepared at three different contents resin of 9, 10, and 11 percent, press temperatures of 165°C and 175°C and hardener contents of 1.5 and 2.5 percent.Based on the DIN-68763 standard physical and mechanical properties including MOR, MOE, IB, and thickness swelling (after 2 and 24 immersion in water) were tested.According to the factorial experimental design at completely random test was analysis. The potential utilization of Beech slabs residues in particleboard production including: resin content (11%), press time (6 min.), press temp. (175°C), and hardener contents (2.5%) were found.

Keywords

• PARTICLEBOARDS
• beech
• SLABS RESIDUES
• PRESS TIME
• RESIN CONTENT
• PRESS TEMPERATURE
• HARDENER CONTENT