Conducting a three-pulse DEER experiment without dead time: A review

Abstract

Double electron-electron resonance spectroscopy (DEER, also known as PELDOR) is used to study spin-spin dipolar interactions between spin labels, at the nanoscale range of distances. The DEER effect is obtained as a signal generated by echo-forming microwave (mw) pulses with an additional mw pump pulse applied at a different frequency. It is important to carry out measurements without artefacts induced by overlap of the pulses in the time scale. Such an experiment without the dead-time effect is achieved using the 4-pulse (4p) DEER method. The analysis of the literature performed here shows however that the 3-pulse (3p) DEER can also be free of the dead time problem, for which there are two possibilities. The first occurs using a specially designed bimodal resonator, for which the two frequencies are completely decoupled. The second possibility, which can be implemented for any commercial spectrometer, involves the signal correction based on an additional “blank” measurement with the pump pulse applied outside the EPR resonance. A detailed comparison of the 3p and 4p DEER data obtained previously by Milov et al. [Appl. Magn. Reson. 41 (2011) 59–67] shows that 3p and 4p approaches give similar results. The advantages of the 3p DEER techniques are discussed.

Keywords

• Double electron-electron resonance
• PELDOR
• Spin labels
• DEER sensitivity