Advanced Science (May 2022)

Nanotwins Strengthening High Thermoelectric Performance Bismuth Antimony Telluride Alloys

  • Haixu Qin,
  • Wanbo Qu,
  • Yang Zhang,
  • Yongsheng Zhang,
  • Zihang Liu,
  • Qian Zhang,
  • Haijun Wu,
  • Wei Cai,
  • Jiehe Sui

DOI
https://doi.org/10.1002/advs.202200432
Journal volume & issue
Vol. 9, no. 14
pp. n/a – n/a

Abstract

Read online

Abstract Bi2Te3 based thermoelectric alloys have been commercialized in solid‐state refrigeration, but the poor mechanical properties restrict their further application. Nanotwins have been theoretically proven to effectively strengthen these alloys and could be sometimes constructed by strong deformation during synthesis. However, the obscure underlying formation mechanism restricts the feasibility of twin boundary engineering on Bi2Te3 based materials. Herein, thorough microstructure characterizations are employed on a series of Bi0.4Sb1.6Te3+δ alloys to systematically investigate the twins’ formation mechanism. The results show that the twins belong to the annealing type formed in the sintering process, which is sensitive to Te deficiency, rather than the deformation one. The Te deficiency combined with mechanical deformation is prerequisite for constructing dense nanotwins. By reducing the δ below −0.01 and undergoing strong deformation, samples with a high density of nanotwins are obtained and exhibit an ultrahigh compressive strength over 250 MPa, nearly twice as strong as the previous record reported in hierarchical nanostructured (Bi, Sb)2Te3 alloy. Moreover, benefitting from the suppressed intrinsic excitation, the average zT value of this robust material could reach near 1.1 within 30–250 °C. This work opens a new pathway to design high‐performance and mechanically stable Bi2Te3 based alloys for miniature device development.

Keywords