Study on Thermal-Oxidative Aging Properties of Ethylene-Propylene-Diene Monomer Composites Filled with Silica and Carbon Nanotubes

Abstract

In this work, a small amount of carbon nanotubes (CNTs) was used to partially replace the silica in ethylene-propylene-diene monomer (EPDM) to prepare EPDM composites via mechanical blending. The mechanical properties, thermal-oxidative aging properties and thermal stability of the composites were systematically investigated. The results showed that with the increase of CNTs content, the Shore A hardness and stress at 100% strain of the composites increased, while the elongation at break decreased. With the aging time increasing, the aging coefficient and elongation at break of composites decreased while hardness increased due to the raise of crosslinking density. In addition, evidences were found to demonstrate the improved aging resistance by adding CNTs in the EPDM composites, including the less change in Shore A hardness, the smaller change ratio of elongation at break and the lower aging coefficient. When the content of CNTs reached 10 phr, the aging coefficient of the EPDM composite aged for 168 h was nearly twice that of the composite without CNTs, and the thermal stability of the EPDM composite with CNTs was improved as demonstrated by thermal analysis.

Keywords

• ethylene-propylene-diene monomer
• carbon nanotubes
• mechanical properties
• thermal-oxidative aging