Applied Water Science (Dec 2022)
Inverse modeling application for aquifer parameters estimation using a precise simulation–optimization model
Abstract
Abstract In this research, a simulation–optimization (S/O) model is used in order to estimate aquifer parameters on two aquifers. In this model, meshless local Petrov–Galerkin (MLPG) is used for simulation purpose and modified teaching–learning-based optimization (MTLBO) algorithm is engaged as optimization model. Linking these two powerful models generates a S/O model named MLPG-MTLBO. The proposed model is applied on two aquifers: a standard and a real field aquifer. In standard aquifer, parameters are only transmissivity coefficients in x and y direction for three zones. The acquired results by MLPG-MTLBO are really close to true values. This fact presents the power of MLPG-MTLBO inverse model. Therefore, it is applied on field aquifer. Unconfined aquifer of Birjand recognized as real case study. Parameters which are needed to be estimated are specific yields and hydraulic conductivity coefficients. These parameters are computed by MLPG-MTLBO and entered to the groundwater flow model. The achieved groundwater table compared with observation data and RMSE is calculated. RMSE value is 0.356 m; however, this error criterion for MLPG and FDM is 0.757 m and 1.197 m, respectively. This means that estimation is precise and makes the RMSE to reduce from 0.757 to 0.356 m, and also, MLPG-MTLBO is an accurate model for this aim.
Keywords