Investigating the behavior of vertical trapezoidal CSSWs stiffened with flat steel plate

Abstract

Abstract Steel shear wall (SSW) is an efficient system used to construct and improve many structures over the past decades. The main weakness of the traditional flat plate SSW is the premature buckling of the plate, for which the corrugated steel shear wall (CSSW) is a suitable alternative. However, the reduced resistance of CSSW compared to flat SSWs is a disadvantage. In this research, their reinforcement by flat steel plates with different dimensions and thicknesses has been used to improve the behavior of vertical trapezoidal steel shear walls (VTSSW). The samples studied in this research were subjected to cyclic loading after verification in Abaqus finite element software. The outcomes showed that reinforcing CSSWs with flat plates increased strength and energy absorption between 6 to 63% and 16 to 92%, respectively. Also, the equivalent viscous damping has increased between 5 and 82%. Also, due to strengthening the CSSWs, the pinching phenomenon in the hysteresis curves has been reduced, and the sudden decrease in strength after buckling in the CSSWs without stiffener has been significantly reduced.

Keywords

• CSSW (CSSW)
• Flat plate
• Strength
• Stiffness
• Cyclic behavior
• Damping