Bioactive Materials (May 2023)
A biomimetic gradient porous cage with a micro-structure for enhancing mechanical properties and accelerating osseointegration in spinal fusion
Abstract
Objectives: Spinal fusion is a widely employed treatment of patients with degenerative disc disease, in which a cage is used to replace the disc for spinal fusion. But it often fails for insufficient mechanical strength and poor osseointegration. Here, we designed a polyether-ether-ketone (PEEK)/tantalum (Ta) composite cage with a biomimetic gradient porous micro-structure, simultaneously enhancing mechanical properties and accelerating osseointegration in spinal fusion. Materials and methods: In the study, based on the mechanical performances of PEEK and osteogenic potential of Ta, and the three-dimensional (3D) structures of cuttlebone and vertebra, the cages were respectively 3D printed by pure PEEK, PEEK with 5 wt% Ta (PEEK/Ta-5), PEEK with 10 wt% Ta (PEEK/Ta-10) and PEEK with 15 wt% Ta (PEEK/Ta-15), then verified in vitro and in sheep cervical fusion model systematically. Results: Vertebral Gyroid structure PEEK/Ta-15 cage exhibited superior mechanical properties than Cuttlebone-like structure PEEK/Ta-15 cage, closer to the cervical vertebra. Furthermore, PEEK/Ta-15 cage with higher Ta microparticles in PEEK provided a biomimetic gradient porous micro-structure with higher surface energy, guiding cell biological behavior, promoting new bone penetration, and accelerating osseointegration in vivo. Conclusion: In conclusion, the study designed a biomimetic gradient porous cage with a micro-structure for enhancing mechanical properties, accelerating osseointegration and forming an anatomical lock in the fusion segment through composites, mechanical efficiency, surface extension, and pores.