Unified Approach for Synthesis and Analysis of Non-Isolated DC-DC Converters

Abstract

Transformational techniques unifying synthesis of two-state DC-DC converters and analytical synthesis techniques allowing generation of all possible converters meeting a certain criteria already exist. The analysis of a family of converters derived from a single converter cell has also been unified. Current waveforms generated by the family of converters were shown to be related. However, a concept or basic building blocks that facilitate unified synthesis, analysis, prediction of current waveforms and assignment of switch states over a very wide range of DC-DC converters is still lacking. This study will propose three 3-terminal basic building blocks and one 3-terminal filter block. It will be shown that between them, they are sufficient for realizing all non-isolated DC-DC converters excluding those with coupled inductors. The various DC-DC converters fall into those realized through cascade, stacked, stacked plus cascade, interleaved/paralleled or differential connection of the basic building blocks. A systematic approach for evaluating input-output current gains will be presented. Moreover, a basic building block will be shown to have fixed switching states for proper operation. This gives rise to the generation of a unique set of current waveforms at the three terminals irrespective of where a basic building block is embedded. It has been shown that the effort and time needed to design DC-DC converters can be reduced as switching device stresses can be estimated without the need for tedious first principle derivations.

Keywords

• Basic building blocks
• converter cells
• current waveforms
• non-isolated DC-DC converters
• steady-state gains
• unified analysis of DC-DC converters