Analysis of vibration characteristics of cutting arm of EML340 continuous miner

ZHANG Yanjun; WANG Junyuan; DONG Lei; DU Wenhua; LI Yong; WANG Shengli

doi:10.13272/j.issn.1671-251x.2016.12.014

Gong-kuang zidonghua (Dec 2016)

Analysis of vibration characteristics of cutting arm of EML340 continuous miner

ZHANG Yanjun,
WANG Junyuan,
DONG Lei,
DU Wenhua,
LI Yong,
WANG Shengli

Affiliations

ZHANG Yanjun: College of Mechanical and Power Engineering, North University of China, Taiyuan 030051, China
WANG Junyuan: College of Mechanical and Power Engineering, North University of China, Taiyuan 030051, China
DONG Lei: College of Mechanical and Power Engineering, North University of China, Taiyuan 030051, China
DU Wenhua: College of Mechanical and Power Engineering, North University of China, Taiyuan 030051, China
LI Yong: College of Mechanical and Power Engineering, North University of China, Taiyuan 030051, China
WANG Shengli: China Coal Pingshuo Group Co., Ltd., Shuozhou 036000, China

DOI: https://doi.org/10.13272/j.issn.1671-251x.2016.12.014
Journal volume & issue: Vol. 42, no. 12
pp. 63 – 67

Abstract

Read online

In order to get vibration characteristics of cutting arm of continuous miner in working condition, the optimized sensor disposition was done taking results of the modal movement energy as main reference and results of modal strain energy as auxiliary reference. Vibration acceleration signals of cutting arm were collected by the sensor, and time-domain analysis and frequency-domain analysis of the signal were done. And the distribution of vibration characteristics and frequency-band energy was obtained. It provides a theoretical basis for further optimization of structural design and fault diagnosis of continuous miner.

Published in Gong-kuang zidonghua

ISSN: 1671-251X (Print)
Publisher: Editorial Department of Industry and Mine Automation
Country of publisher: China
LCC subjects: Technology: Mining engineering. Metallurgy
Website: http://www.gkzdh.cn/en.htm

About the journal

Abstract

Keywords