Study on the Influence of fly ash, mineral powder and silicon powder on the performance of high-performance concrete

Abstract

To study the effect of fly ash, mineral powder, and silica fume on the working performance and mechanical properties of C70 high-performance concrete by adding the same amount of fly ash, granulated blast furnace slag powder, and silica fume as a composite admixture to replace the amount of cement. Influencing the law, at the same time, the optimal dosage ratio of various admixtures is determined through the orthogonal experiment. The results show that: when adding 6% silica fume, it can improve the performance of high-performance concrete. When the amount is increased, the viscosity of the concrete increases and the fluidity decreases. Incorporating an appropriate amount of silica fume can greatly increase the compressive strength of concrete. When blended with fly ash in the proportion of 20%, the performance of high-performance concrete is better. When the same amount of fly ash replaces cement, fly ash reduces hydration and improves the cohesion of concrete, 7d, 28d the compressive strength of the cube increases significantly. Adding 10% mineral powder, mineral powder can affect the early compressive strength of highperformance concrete, extend the setting time of concrete, and improve the pumping capacity of concrete.