Advances in Civil Engineering (Jan 2022)

Nanoprocessing of Industrial Rejects for Controlling Operational Energy of Buildings

  • Sandeep Tembhurkar,
  • Priyanka Nayar,
  • Naumanuddin Azad,
  • Rahul Ralegaonkar,
  • Mangesh Madurwar

DOI
https://doi.org/10.1155/2022/2969266
Journal volume & issue
Vol. 2022

Abstract

Read online

This study investigates the pozzolanic potential of industrial waste, which fails to meet the chemical composition as defined by the various international standards, e.g., IS: 3812 (Part 1): 2017 and ASTM C618-19 to adopt as a supplementary cementitious material. The effects of mechanical nanoprocessing on pozzolanic reaction efficiency, impact on energy efficiency, and construction affordability were studied. The result of mechanical milling shows the improvement in pozzolanicity, and the physicomechanical characteristics of novel concrete incorporated with identified industrial waste are comparable with control concrete. The building energy simulation was carried out using the BIM software for the house, modelled with controlled concrete, and novel concrete incorporating the identified milled industrial waste. The peak cooling load and building material cost of a novel concrete model house were 34% and 9.09% less than the conventional concrete. The study reveals that the chemical characterization provided in international standards shall not be the only criteria to decide the suitability of the materials to use as supplementary cementitious material, whereas the same can be examined and improved through various treatments, and mechanical nanoprocessing may be one of the best options. Cement production and utilization affect the environment. To reduce the concern, pozzolanic investigation of industrial waste is necessary, which can address the issue of uncontrolled extraction of natural resources, emission, disposal, and pollution globally.