Study of barium titanate/nickel-zinc ferrite based composites: Electrical and magnetic properties and humidity sensitivity

Abstract

Composites based on barium titanate and nickel zinc ferrite doped with cooper and samarium were prepared by a mixing method. The formation of barium titanate tetragonal crystal structure and nickel zinc ferrite cubic spinel structure was identified. Polygonal grains were formed in all three types of ceramics. Due to the very high conductivity of ferrite phase in the materials the ferroelectric hysteresis loops were roundish and not typical for classical ferroelectric material. The break down field was found to be similar for all compositions. Leakage current measurements have shown the existence of different types of conductivity mechanisms in each material. The impedance analysis suggested a bit stronger impact of grain boundaries on total conductivity of the composites and the mechanism of polaronic conduction of two types. The magnetization of the composites is lower than for the pure ferrite phase and corresponds to the weight fraction of the ferrite phase. The soft magnetic nature of these composites might be very useful for development of multifunctional devices which will be able to switch the magnetization with small external magnetic field. Humidity sensing properties of the prepared ceramics were also investigated.

Keywords

• composites
• electrical properties
• magnetic properties
• humidity sensitivity