Characterization of Sensitivity of Time Domain MEMS Accelerometer

Abstract

This paper characterizes the sensitivity of a time domain MEMS accelerometer. The sensitivity is defined by the increment in the measured time interval per gravitational acceleration. Two sensitivities exist, and they can be enhanced by decreasing the amplitude and frequency. The sensitivity with minor nonlinearity is chosen to evaluate the time domain sensor. The experimental results of the developed accelerometer demonstrate that the sensitivities span from −68.91 μs/g to −124.96 μs/g and the 1σ noises span from 8.59 mg to 6.2 mg (amplitude of 626 nm: −68.91 μs/g and 10.21 mg; amplitude of 455 nm: −94.51 μs/g and 7.76 mg; amplitude of 342 nm: −124.96 μs/g and 6.23 mg), which indicates the bigger the amplitude, the smaller the sensitivity and the bigger the 1σ noise. The adjustable sensitivity provides a theoretical foundation for range self-adaption, and all the results can be extended to other time domain inertial sensors, e.g., a gyroscope or an inclinometer.

Keywords

• MEMS
• inertial sensor
• accelerometer
• time domain measurement
• adjustable sensitivity