High Temperature Tribology under Linear Oscillation Motion

Abstract

High temperature tribology is considered to begin from a minimum temperature of 300–350 °C, where organic base oils and polymers begin to decompose, until a temperature of 1000 °C. In this field of tribology, tests are typically run under dry or solid-state friction, unless a solid lubricant is used, since most lubricants will oxidize or break down when exposed to these extreme temperatures. Therefore, this form of tribotesting is useful to determine the friction, wear, and other tribological characteristics of coatings, ceramics, alloys, cermets, and similar materials. Additionally, high temperature tribology is important to further understand the frictional interactions and adhesive behavior of contacts that operate at these high temperatures. When considering measurements of the tribological parameters in a high temperature application, the standard Schwingung, Reibung, Verschleiž (SRV) (Oscillating, friction, wear, in English) reciprocating, linear-oscillatory tribometer can be modified for testing temperatures of up to 1000 °C by using a high temperature heating block. With this configuration, the instrument can accurately monitor many parameters of the tribosystem, such as coefficient of friction, electrical resistance, zero stroke point, sliding speed, and others. As a result, the SRV instrument is shown to be a powerful tool for high temperature tribotesting. This paper will provide an overview of this high temperature tribology test rig and will discuss its versatility and efficacy, and will show how it can effectively be implemented in both research and practical applications for the development of various coatings and other high temperature tribological contacts.

Keywords

• high temperature tribotesting
• SRV
• friction
• wear
• linear oscillation tribometer