Energy Geoscience (Jul 2023)
Pore structure characterization based on NMR experiment: A case from the Shanxi Formation tight sandstones in the Daning-Jixian area, eastern Ordos Basin
Abstract
The study of pore structure requires consideration of important factors including pore throat size, pore radius composition, and pore-throat configuration. As the nuclear magnetic resonance (NMR) experimental results contain rich information about pore structures and fluid occurrence states, this study investigated the pore structures of the tight sandstone reservoirs of the Shanxi Formation in the Daning-Jixian area, eastern Ordos Basin. Firstly, by making the inverse cumulative curve of the NMR T2 spectrum coincide with the capillary pressure curves which were obtained by the mercury injection capillary pressure (MICP) technique, this study derived a conversion coefficient that can be used to convert the NMR T2 spectrum into the pore throat radius distribution curves based on the NMR experimental results. Subsequently, we determined the pore radius intervals corresponding to irreducible water distribution using the NMR-derived pore radius distribution curves. Finally, the NMR T2 distribution curves based on the fractal theory were analyzed and the relationships between fractal dimensions and parameters, including permeability, porosity, reservoir quality index (RQI), flow zone indicator (FZI), irreducible water saturation, RT35, and RT50, were also discussed. The NMR-derived pore throat radius distribution curves of the study area are mainly unimodal, with some curves showing slightly bimodal distributions. The irreducible water mainly occurs in small pores with a pore radius less than 100 nm. As the permeability decreases, the contribution rate of small pores to the irreducible water gradually increases. The NMR-based fractal dimensions of pores show a two-segment distribution. Small pores have small fractal dimensions and are evenly distributed, while large pores have large fractal dimensions and complex pore structures. The fractal dimension of large pores (Dmax) is poorly correlated with porosity but strongly correlated with FZI, RQI, RT35, and RT50. These results indicate that large pores are the main pore zones that determine the seepage capacity of the reservoirs. Additionally, there is a certain correlation between Dmax and the irreducible water saturation.
