Heliyon (May 2024)

Research on resilience assessment method of train control on-board system

  • Jinping Qi,
  • Jinhui Shi,
  • Hanqing Tao,
  • Daqiang Yan,
  • Xiaoyu Liu,
  • Hongwei Li

Journal volume & issue
Vol. 10, no. 9
p. e30673

Abstract

Read online

To address the problem of difficult performance assessment of train control on-board system after recovery from failures, we have proposed a resilience assessment methodology that uses reliability as an indicator of system resilience. Since the system failures are time-dependent, we adopted the Discrete Time Bayesian Network method to obtain the system's reliability before and after failure. Subsequently, we used an exponential recovery model to quantify the system's performance curve during the recovery phase, and finally utilized the resilient triangle area method to quantify its resilience size. Analyzing the CTCS3-300T train control on-board system, we found that the resilience of the system with cold standby redundancy design and hot standby redundancy design were 89.44 % and 87.34 %, respectively, indicating a slight decrease in system performance after recovery from failures compared to pre-failure levels. At that time, it was necessary to adjust operational plans based on actual conditions to avoid greater impact on the railway network. This paper realizes performance resilience of train control on-board system after failure recovery, which can be applied to similar systems and provide theoretical references for realizing intelligent maintenance of the high-speed train.

Keywords