Microbial cement grout anchoring steel reinforcement pull-out test

Abstract

Abstract Microbial cement, known for its superior fluidity, stable crystal formation, and strong bond with concrete, is an effective solution in fixing defects such as voids that appear due to insufficient grouting in the joints of precast concrete components. To evaluate the mechanical properties of rebar anchored with microbial cement grout, three pull-out tests were designed, taking into account parameters such as calcium source concentration, the filler in borehole voids, and the shape of the rebar. The results indicate that specimens with a higher concentration of calcium source require fewer grouting cycles, but the pull-out bearing capacity of the anchored rebar is lower. However, the introduction of quartz sand as a filler in the borehole voids results in a significant increase in the pull-out bearing capacity of the rebar compared to specimens without filler. Among these, the specimens with a medium particle size of 0.5 ~ 1 mm (1/4δ ~ 1/2δ, the gap of δ = 2 mm between the steel bars and hole wall) have the highest pull-out bearing capacity. In comparing rebar shapes, ribbed rebar slightly outperforms smooth round rebar in terms of pull-out bearing capacity. Based on the experimental results analysis, the anchoring mechanism of microbial cement grouting on reinforcement has been elucidated.