Scientific Reports (Mar 2024)

Investigation of color and physicomechanical properties of peek and pekk after storage in a different medium

  • Nihan Kaya,
  • Rafat Sasany,
  • Nuran Yanıkoglu,
  • Busra Tosun

DOI
https://doi.org/10.1038/s41598-024-54695-5
Journal volume & issue
Vol. 14, no. 1
pp. 1 – 6

Abstract

Read online

Abstract The aim of this study is to assess color stability, solubility, and water sorption on polyether ether ketone (PEEK) and polyether ketone ketone (PEKK) after immersion in different storage conditions. Material and Methods Ninety disc-shaped specimens (8 × 2) were obtained from CAD/CAM blocks [PEEK (n = 45) and PEKK (n = 45)]. Before immersion, baseline color value data were recorded with a spectrophotometer. The specimens were soaked in three solutions red wine, coffee, and distilled water at 37 °C for 28 days. Following immersion, color values were remeasured, and color-change values (ΔE) were calculated. Water sorption and solubility were assessed by mass gain or loss after storage in water for 28 days. The Kruskal–Wallis and the Mann–Whitney U test were used for analysis (P = 0.05). Results ΔE00 between PEEK and PEKK was significantly different statistically (P red wine > distilled water. The results of this study demonstrated that PEKK was more successful in polymer-containing CAD/CAM materials as it exhibited less color change and water absorption.