Acta Scientiarum: Technology (Apr 2009)

Biossorção de níquel e cromo de um efluente de galvanoplastia utilizando alga marinha pré-tratada em coluna = Biosorption of nickel and chromium from a galvanization effluent using seaweed pre-treated on a fixed-bed column

  • Márcia Teresinha Veit,
  • Edson Antonio da Silva,
  • Márcia Regina Fagundes-Klen,
  • Célia Regina Granhen Tavares,
  • Gilberto da Cunha Gonçalves

Journal volume & issue
Vol. 31, no. 2
pp. 175 – 183

Abstract

Read online

Este trabalho teve por objetivo o estudo da biossorção dos íons cromo e níquel presentes no efluente do processo de uma indústria de galvanoplastia, utilizando como biossorvente a biomassa de alga marinha pré-tratada Sargassum filipendula. As condições deoperação da coluna foram: massa de biossorvente de 8 g, pH do efluente de alimentação 3,85, temperatura de 30ºC, vazão de 6 mL min.-1 e concentrações iniciais de alimentação (cromo+níquel) de 7,12 e 3,66 meq L-1. Foi empregado um modelo matemático para representar a dinâmica da biossorção em coluna de leito fixo. O modelo da isotermamulticomponente de Langmuir (qm= 2,78 meq g-1, bCr = 0,85 L meq-1, bNi = 0,08 L meq-1) foi utilizado para representar os dados de equilíbrio da coluna e para simular a dinâmica de biossorção dos íons. Os resultados da simulação demonstraram que o modelo matemáticoempregado foi capaz de descrever satisfatoriamente a complexa dinâmica de biossorção dos íons presentes no efluente.This work investigated the biosorption of chromium (III) and nickel (II) present in the effluent of a galvanoplasty plant using the pre-treated biomass of Sargassum filipendula seaweed. The column operation conditions were 8 g of biosorbent mass, 3.85 pH for the feed effluent, 30ºC temperature, 6 mL min.-1 flow rate, 7.12 meq L-1 initial chromium concentration and 3.66 meq L-1 initialnickel concentration. A mathematical model was used to represent the dynamics of biosorption of the metals in a fixed-bed column. The Langmuir multicomponent isotherm model (qm = 2.78 meq g-1, bCr = 0.85 L meq-1, bNi = 0.08 L meq-1) was used to represent the equilibrium data of the column and to simulate the biosorption dynamics of the ions. The simulation results showed that the mathematical model described satisfactory the complex binary biosorption of chromium and nickel in the effluent.

Keywords