Multi-functional glass/carbon fibers hybrid inter/intra laminated composites

Abstract

A detailed experimental study was performed on the piezo-resistive damage sensing of novel electrically conductive inter/intra glass/carbon fiber hybrid epoxy laminated composites reinforced with micro carbon fibers along the thickness direction between the laminates using electro-flocking technique. The electrical resistance is determined by four-circumferential probe measurements under tensile and flexure loads. Intralaminar hybrid composites’ mechanical and electrical properties showed a dependency on layup angle, with glass fibers along the loading direction showed the highest initial resistance value (1180 Ω) and ultimate tensile strength (400 MPa). Intra-ply composites with [±45/∓45] layup orientation demonstrated the lowest ultimate tensile strength (57 MPa) and the highest elongation at break (9.7%). Mechanical and electrical properties of interlaminar hybrid composites showed a dependency on the number of carbon fiber laminates. More carbon fiber laminates within the composite layup produces a lower initial resistance value (0.37 Ω) and higher ultimate tensile strength (247 MPa). In both intra and inter composites cases, with the addition of short carbon fibers, the initial resistance decreased. In some cases, with the addition of short carbon fibers the failure mechanisms changed. Composites of all types experienced much higher percentage change in resistance under flexural loading due to severe interlaminar failure compared to corresponding cases under tensile loading conditions. These results are useful for designing composite structures with emphasis on structural health monitoring.

Keywords

• Piezo resistance
• Inter and intra hybrid composites
• Electro-flocking
• Damage sensing
• Tensile and flexure loading