Optimization of the critical overlap length of hudraulic distributors regarding cavitation inception

Abstract

Abstract The present paper is focused on the optimization of the overlap length in various types of distributors in hydraulic systems. It has been shown that this length has a strong influence on cavitation in rotating distributors, so its optimization would be beneficial to reduce the detrimental effects of cavitation, such as noise, vibrations, and instabilities. The objective of the present study is to generalize the modelling of the overlap length to different types of distributors and to determine the critical length at cavitation inception. The results show that the pressure losses in rotating distributors and in other types of distributors are similar, including the slide-valves that are the vast majority of distributors in hydraulic systems. It is confirmed that the overlap length has a stronger influence on the cavitation development than the distributor rotation speed. A critical overlap length of 0.071 mm is obtained, below which no significant development of cavitation is obtained, at all rotation speeds. Article Highlights The pressure losses in a rotating distributor and in a slide-valve can be expressed similarly. The overlap length has a large influence on the cavitation development, much larger than the rotation speed. A critical overlap length of 0.071 mm was obtained, below which there is almost no cavitation, for any rotation speed.

Keywords

• Hydraulic distributors
• Cavitation
• Modeling
• Optimization
• Overlap length