Multi‐Functional MoO3 Doping of Carbon‐Nanotube Top Electrodes for Highly Transparent and Efficient Semi‐Transparent Perovskite Solar Cells

Abstract

Abstract MoO3 doping of carbon‐nanotube top electrodes in perovskite solar cells is multi‐functional and facilitates p‐doping, favorable energy‐level alignment, and enhanced hole transport. The optimal layer thickness of MoO3 (8 nm) is determined for decreasing the sheet resistance of carbon‐nanotube electrodes without damaging the perovskite film. The sheet resistance decreases by approximately one‐third from its original value, which is a substantially better result than that previously reported for acid doping of carbon‐nanotube top electrodes. MoO3 deposition lowers the Fermi level of the carbon‐nanotube electrode, improving its energy‐level alignment and hole‐transfer performance. When coated with 2,2′,7,7′‐tetrakis[N,N‐di(4‐methoxyphenyl)amino]‐9,9′‐spirobifluorene (spiro‐MeOTAD), MoO3 crystallizes on the carbon nanotubes and further enhances hole collection. Semi‐transparent perovskite solar cells with MoO3‐doped carbon‐nanotube electrodes have a power conversion efficiency of 17.3% with a transmittance of approximately 60% (at a wavelength of 1000 nm). Because of their favorable transparency in the infrared region, these perovskite solar cells are evaluated for use in a tandem structure with silicon solar cells via computational simulations. The predicted device efficiency (23.7%) exceeds that of conventional indium‐tin‐oxide‐based tandem solar cells (23.0%).

Keywords

• carbon nanotubes
• MoO 3 doping
• silicon solar cells
• tandem solar cells
• transparent perovskite solar cells