Dynamic Behaviour of an Automotive Dual Clutch Transmission during Gear Shift Maneuvers

Abstract

The paper presents a model for the torsional dynamics of an automotive driveline equipped with a Dual Clutch Transmission (DCT), focusing on the gear rattle phenomenon arising during the transients of engagement and disengagement of the clutches, and during the synchronizing manoeuvres. This vibro-acoustic phenomenon, particularly annoying in automotive transmissions, can be accentuated by the presence of many unloaded gears in this type of gearbox. Dual Clutch Transmission systems are today largely diffused in the car automatic transmissions, permitting fast gear shifts and avoiding the interruption of the drive torque. The study is conducted by adopting a tribo-dynamic model with lumped parameters, considering the oil lubricant between the teeth of the unloaded gears acting as a damper during the impacts. A layout of a gearbox with six speed ratios has been assumed, in which a dual clutch system transmits the drive torque alternatively between the various gear pairs in the odd and even branches. The results of the numerical simulations show that this kind of transmission system is characterised by hard rattling behaviour, particularly during the rapid phases of clutches engaging/disengaging and during the gears synchronisation. Some solutions to attenuate the torsional vibrations, and therefore the rattling behaviour of the unloaded gears in a DCT gearbox, can be analysed by the proposed model to determine, as example, the time duration of the gear shift phase or of the pre-selection phase to the next gear, as well as to identify the optimal lubrication conditions of the gear pairs during the gear shift transients.

Keywords

• dual clutch
• driveline
• vibrations
• gear box
• gear rattle