Heliyon (May 2021)

Optimising pyrolysis conditions for high-quality biochar production using black soldier fly larvae faecal-derived residue as feedstock

  • Nqobile Nkomo,
  • Alfred Oduor Odindo,
  • William Musazura,
  • Roland Missengue

Journal volume & issue
Vol. 7, no. 5
p. e07025

Abstract

Read online

The disposal of feacal matter from Urine Diversion Dry Toilets is a significant challenge due to limited land availability, possible underground water contamination, and the risk of spreading diseases. The collected faecal matter can be fed to Black Soldier Fly Larvae to produce protein-rich larvae used as animal feed. The disposal of the leftover waste (BSFL residue) is still a problem due to the risk of residual pathogen contamination. The BSFL residue contains residual plant nutrients and can be further processed into biochar. Faecal matter biochar offers an exciting value proposition where the pyrolysis process guarantees a 100% pathogen elimination. It also results in significant waste reduction in transport, storage weight, and volume. A preliminary study was conducted to (i) optimise pyrolysis conditions (optimal temperature treatment and residence time) for biochar production using residue obtained after faecal matter from urine diversion dry toilets was fed to black soldier fly larvae as feedstock; and (ii) determine the physicochemical and morphological characteristics of biochar produced. The residue was pyrolysed at 300, 400, and 500 °C and characterised for chemical, biological and physical characteristics. Surface area (6.61 m2 g−1), pore size, and C: N (9.28) ratio increased at 500 °C for 30 min. Exchangeable bases, (Calcium) Ca, (Magnesium) Mg, (Potassium) K, and (Sodium) Na increased with increasing pyrolysis temperature. The increase in basic cations resulted in an increase in pH from 6.7 in the residue to 9.8 in biochar pyrolysed at 500 °C. Biochar pyrolysed at 500 °C can therefore be used to improve acidic soils. Phosphorus increased with increasing pyrolysis temperature to 3 148 mg kg−1 at 500 °C. Biochar produced at 500 °C for 30 min had desirable characteristics: surface area, exchangeable bases, and pH. Also, biochar can be used as a phosphorus source with potential for crop production, although an external nitrogen source is needed to meet crop nutrient requirements.

Keywords