Mechanical and thermal properties of high density polyethylene - dried distillers grains with solubles composites

Abstract

Dried Distillers Grain with Solubles (DDGS) was evaluated as a bio-based fiber reinforcement. Composites of high density polyethylene (HDPE) composed of 25% by weight DDGS and either 0% or 5% by weight of maleated polyethylene (MAPE) were produced by twin screw compounding and injection molding. An improved DDGS bio-filler was produced by solvent treating DDGS (STDDGS). Injection-molded test specimens were evaluated for their tensile, flexural, impact, and thermal properties. Composite blends composed of STDDGS were superior to their DDSG counterparts. Composites made with STDDGS and MAPE had significantly improved tensile and flexural properties compared to neat HDPE. Impact strength of all composites was similar and lower than neat HDPE. Soaking of tensile bars of the various PE-DDGS blends in distilled water for 28 days altered their physical, color, and mechanical properties. Differential scanning calorimetery and thermogravimetric analysis were conducted on neat HDPE and DDGS composites to evaluate their thermal properties.

Keywords

• Particle size
• Adsorption tests
• Mechanical properties
• Flexural properties
• Colorimetery
• Differential scanning calorimetry
• Thermal properties
• Injection molding