Materials (Sep 2020)
Comparative Research on Tensile Properties of Cement–Emulsified Asphalt–Standard Sand (CAS) Mortar and Cement–Emulsified Asphalt–Rubber Particle (CAR) Mortar
Abstract
The paper compared the tensile strength and elongation at break of cement–emulsified asphalt–standard sand (CAS) mortar and cement–emulsified asphalt–rubber particle (CAR) mortar. The tensile properties of CAS and CAR mortars were investigated. Microscopic analysis was carried out by Environmental Scanning Electron Microscopy and Energy Dispersive Spectrometer. The test results showed that the tensile strength of the CAR mortar at 7 days improved by about 9.09% higher than that of the CAS mortar, and further increased to 17.76% higher at 28 days The values of elongation at break of the CAR mortars at 3 days, 7 days, and 28 days increased by about 70% higher than those of the CAS mortars. Microscopic analysis showed that in the hardened CAS mortar, an obvious bubble accumulation layer with many pores appeared at the interfacial transition zone (ITZ). In the hardened CAR mortar, asphalt wrapped both cement hydration products and rubber particles and formed an integrated structure where a relatively dense and strong ITZ was formed as a result. This paper proves that the CAR system has superior tensile properties and has a promising future in waste rubber disposal.
Keywords