Study on the Static Characteristics of a Pre-Pressure Single-Action Membrane-Type Restrictor Used in a Single Oil Pad

Abstract

In order to further improve the static stiffness of the hydrostatic bearing with the membrane-type restrictor, in this study, a static characteristics model of the pre-pressure single-action membrane-type restrictor (PSMR) is derived, and the criteria for achieving the optimum stiffness of the restrictor are summarized. A PSMR design method following the criteria of optimal stiffness is proposed. Then, the effect of design parameters on the performance of the restrictor is accurately evaluated by numerical simulation and orthogonal experiment with the grinder oil pad, as an example. Finally, the performance of the PSMR is compared with that of the traditional restrictors, and the main source of design error of the membrane-type restrictor is discussed. The results show that the effect of the design error of the membrane structure on the performance of the restrictor is reduced to some extent by the parallel oil circuit of the PSMR. In addition, the membrane-type restrictor designed according to the method of this paper theoretically has better static stiffness than the single-action membrane-type restrictor without pre-pressure, with an average improvement of about 14.14%.

Keywords

• pre-pressure single-action membrane-type restrictor
• theoretical modeling
• numerical model
• static characteristics