Comparison of the Parameters of the Exergoeconomic Environmental Analysis of Two Combined Cycles of Three Pressure Levels with and without Postcombustion

Abstract

Nowadays, in Mexico, most of the installed electricity generation capacity corresponds to combined cycles, representing 37.1%. For this reason, it is important to maintain these cycles in good operating conditions, with the least environmental impacts. An exergoeconomic and environmental analysis is realized to compare the operation of the combined cycle, with and without postcombustion, with the comparison of exergoeconomic and environmental indicators. With the productive structure of the energy system, the process of formation of the final products and the residues are identified, and an allocation criterion is also used to impute the formation cost of residue to the productive components related to its formation. This criterion considers the irreversibilities generated in each productive component that participates in the formation of a residue. The compositions of pollutant gases emitted are obtained, and their environmental impact is determined. The unit exergoeconomic cost of the power output in the gas turbine is lower in the combined cycle with postcombustion, indicating greater efficiency in the process of obtaining this energy stream, and the environmental indicators of global warming, smog formation and acid rain formation are higher in the combined cycle with postcombustion, these differences being 5.22%, 5.53% and 5.30%, respectively.

Keywords

• combined cycle
• postcombustion
• residue
• environmental indicators
• exergoeconomic operation costs