Water (Jan 2019)
Brine Recycling from Industrial Textile Wastewater Treated by Ozone. By-Products Accumulation. Part 2: Scaling-Up
Abstract
Extremely high volumes of salty wastewater are produced by textile manufacturers daily. Therefore, brine recycling from the wastewater should be regarded as a crucial issue within the textile industry. Ozonation was used in this two-part study as a purification method for industrial textile wastewater polluted by low-molecular-weight salts (LMWS). Part 1 revealed the accumulation of ozonation by-products in a multi-recycling system. The objective of Part 2 was the scaling-up of the process and the investigation of the occurrence of by-products. It was found that ozonation works well in an alkaline reaction medium, which was characteristic of the wastewater from a dye house; an almost complete color removal was achieved within 30 min of treatment. The brine that was produced from the wastewater treated by ozonation in a 20 L bubble column reactor was recycled successfully. Dyeing of cotton with five types of reactive dyes in various shades resulted in very good values of DECMC, which is the normative color matching parameter, and were between 0.15 and 1.2. The color fastness obtained for upcycled fabrics were satisfactory, and not worse than standard values. Although accumulation of the side products was detected in Part 1, the fabric discharges produced in the scaled-up process were free from carcinogenic amines and heavy metals. The study indicated that ozonation can be applied in the industry as a method for textile wastewater recycling.
Keywords