Economic analysis of reciprocating engine generating with bio-syngas at predicted maximum power condition

Abstract

In order to effectively utilize woody biomass, which has a low abundance density, it is necessary to develop a power generation system that can convert it with high efficiency even with a small capacity as less than 2 MW. For electricity generation, it is reasonable to use a small reciprocating engine. In the case of a naturally aspirated spark ignition reciprocating engine (SIRE), the amount of aspirated gas in one cycle is determined almost entirely by the displacement. The thermal efficiency of the SIRE generally increases with the power. Therefore, to improve the thermal efficiency, it is effective to make the low heating value (LHV) of the fuel higher to increase the power of the naturally aspirated SIRE. In this paper, three methods are used to increase the LHV of the bio-syngas: 1) reducing the nitrogen density of the bio-syngas (upgrade bio-syngas), 2) adding hydrogen to the bio-syngas, and 3) adding methane to the bio-syngas. Using these fuels, 1) the conditions for high power, and 2) the costs assumed for each condition, are evaluated through experiments and estimates. The results showed that the upgrade bio-syngas, obtained by gasification with oxygen-enriched air, had the highest power and the best cost-effectiveness.

Keywords

• Economic analysis
• Bio-syngas
• Reciprocating engine
• Maximum power