Fluorinated semi-interpenetrating polymer networks for enhancing the mechanical performance and storage stability of polymer-bonded explosives by controlling curing and phase separation rates

Abstract

Herein, the effect of fluoropolymer binders on the properties of polymer-bonded explosives (PBXs) was comprehensively investigated. To this end, fluorinated semi-interpenetrating polymer networks (semi-IPNs) were prepared using different catalyst amounts (denoted as F23-CLF-30-D). The involved curing and phase separation processes were monitored using Fourier-transform infrared spectroscopy, differential scanning calorimetry, a haze meter and a rheometer. Curing rate constant and activation energy were calculated using a theoretical model and numerical method, respectively. Results revealed that owing to its co-continuous micro-phase separation structure, the F23-CLF-30-D3 semi-IPN exhibited considerably higher tensile strength and elongation at break than pure fluororubber F2314 and the F23-CLF-30-D0 semi-IPN because the phase separation and curing rates matched in the initial stage of curing. An arc Brazilian test revealed that F23-CLF-30-D-based composites used as mock materials for PBXs exhibited excellent mechanical performance and storage stability. Thus, the matched curing and phase separation rates play a crucial role during the fabrication of high-performance semi-IPNs; these factors can be feasibly controlled using an appropriate catalyst amount.

Keywords

• Semi-interpenetrating polymer networks
• Fluoropolymer
• Curing rate
• Phase separation rate
• Polymer-bonded explosives