Evaluation of Different Pectic Materials Coming from Citrus Residues in the Production of Films

Abstract

This article explores the use of citrus residues as a source of different pectic materials for packaging film production: a water-soluble orange residue extract (WSE) (~5% pectin), semi-pure pectins extracted in citric acid (SP) (~50% pectin), and commercial pure citrus pectins (CP). First, these materials were characterized in terms of chemical composition. Then, films were produced using them pure or mixed with chitosan or glycerol through solvent-casting. Finally, antioxidant activity, functional properties (e.g., mechanical and gas barrier properties), and visual appearance of the films were assessed. WSE films showed the highest antioxidant activity but the lowest mechanical strength with the highest elongation at break (EB) (54%); incorporating chitosan increased the films’ strength (Young’s modulus 35.5 times higher). SP films showed intermediate mechanical properties, reinforced by chitosan addition (Young’s modulus 4.7 times higher); they showed an outstanding dry O2 barrier. CP films showed a similar O2 barrier to SP films and had the highest Young’s modulus (~29 MPa), but their brittleness required glycerol for improved pliability, and chitosan addition compromised their surface regularity. Overall, the type of pectic material determined the film’s properties, with less-refined pectins offering just as many benefits as pure commercial ones.

Keywords

• pectins
• orange residue
• films
• chitosan
• antioxidant activity