Adsorption of Phenols on Carbonaceous Materials of Various Origins but of Similar Specific Surface Areas

Abstract

The adsorption of phenol (Ph), 4-chlorophenol (CP), and 4-cresol (MP) from aqueous solutions on three carbonaceous materials of diverse origins but similar specific surface areas was investigated. Vulcan XC72 carbon black (CB), AKP-5 activated coke (AC), and activated tire pyrolysis char (AP) were examined as adsorbents. The kinetics and equilibrium adsorption, as well as the influence of pH and ionic strength of each solution on the adsorption process, were studied. The results revealed that the adsorption was pH-dependent and preferred an acidic environment. The presence of an inorganic salt in the solution (ionic strength) did not affect the adsorption processes of the three adsorbates. The pseudo-first- and pseudo-second-order equations, as well as the Weber–Morris and Boyd kinetic models, were used to describe the adsorption kinetics. It was found that equilibrium was reached for all adsorbates after approximately 2–3 h. Adsorption kinetics followed a pseudo-second-order model, and the adsorption rate was determined by film diffusion. The adsorption isotherms were described using the Langmuir and Freundlich equations. The results revealed that the adsorption processes of Ph, CP, and MP on all three adsorbents from the water were better described by the Langmuir model. The adsorption of CP was the most efficient, the adsorption of MP was slightly weaker, and the adsorption of phenol was the least efficient.

Keywords

• phenols
• adsorption
• carbon black
• activated coke
• activated tire pyrolysis char