Design and optimization analysis of pylon open lower corbel

Abstract

This study, centered around the engineering context of the Wuxue Yangtze River Bridge, addresses the challenge of significant temperature-induced secondary internal forces in the short lower tower column. A novel open lower corbel tower scheme is proposed as a solution. Firstly, comprehensive finite element models are established for both the open lower corbel pylon scheme and the traditional lower continuous beam pylon scheme. These models are employed for finite element analysis to derive bending moments and displacements of the bridge pylon under various loads, including permanent, vehicle, temperature, and wind loads. Subsequently, considering internal force distribution and stiffness, a comparative assessment is made between the open lower corbel cable pylon scheme and the traditional lower continuous beam cable pylon scheme. The findings reveal that the open corbel structure bridge pylon exhibits lower transverse bending moment values under the influence of permanent load, vehicle load, temperature load, and wind load. This reduction is advantageous for mitigating the issue of significant temperature-induced secondary internal forces in the bridge pylon. Additionally, the transverse bridge stiffness of the open lower corbel cable pylon scheme is found to be on par with that of the lower continuous beam cable pylon scheme. Moreover, topology optimization of the original corbel design is accomplished using the relative density method. The computational results demonstrate that the corbel’s stress and deformation under vertical loads meet code requirements. These research findings offer valuable insights for the design and construction of similar projects.

Keywords

• internal force
• lower corbel
• optimization
• pylon
• stiffness