Compression Test of Thermally-Treated Beech Wood: Experimental and Numerical Analysis

Abstract

Experimental and numerical analysis of a compression test carried out on samples of as-received and thermally-treated beech (Fagus sylvatica L.) wood is presented. In a normal climate, samples with the dimensions of 20 x 20 x 20 mm were exposed to static compressive loads parallel and transverse to the grain. Afterwards, the test was modelled using the finite element method. It was confirmed that, after thermal modification, the wood’s density decreased and the stiffness in both tested directions increased. After the thermal treatment, the strength of beech wood increased in the direction parallel to the grain and decreased in the direction transverse to the grain. Based on the comparison of experimental and numerical results, it is possible to use the hyperelastic constitutive law to reasonably model the force and displacement obtained in the compression test samples.

Keywords

• Mechanical properties
• Thermally-treated beech wood
• Numerical simulation