Study on the mechanical and rheological properties of ultra-high performance concrete

Abstract

The ultra-high performance concrete (UHPC) was prepared by using the limestone coarse aggregate and ordinary Portland cement. The effects of sand ratio, water to cement ratio (W/C), cementitious materials, type and content of fiber, dosage of water reducer and defoamer on the mechanical and rheological properties of the UHPC were investigated. The correlations among influence factors and performances of UHPC were discussed. Moreover, the internal relationship between loading rate and elasticity modulus of UHPC was also studied. The results indicate that the compressive strength of UHPC first increases and then decreases with the increase of sand ratio, and a maximum compressive strength of UHPC was found at the sand ratio of 41%. The water reducer content of fresh UHPC firstly decreases and then increases with the increase of sand ratio. The compressive strength of UHPC firstly increases and then decreases with the increase of W/C, which also increases with the increase of cementitious materials. The elasticity modulus of UHPC decreases with increase of sand ratio and cementitious materials content, and the compressive strength and elasticity modulus of UHPC cured for 28 d increase with the increase of defoamer dosage. The slump flow of fresh UHPC first increases and then decreases with the increase of water reducer dosage. An optimum fiber content of UHPC can enhance the tensile strength and adhesive property, which can play the restraining deformation and toughening effect.

Keywords

• Ultra-high performance concrete
• Strength
• Slump flow
• Modulus of elasticity
• Rheological property