Applying the improved stratigraphic modified Lorenz technique for dividing the highly heterogeneous clastic reservoirs into hydraulic flow units

Abstract

Abstract The present study applies the improved stratigraphic modified Lorenz (ISML) technique to divide the Matulla Formation in Muzhil Oil Field in the Gulf of Suez into some hydraulic flow units (HFUs) and to check the flow efficiency contribution of each hydraulic flow unit (HFU) to the total bulk flow capacity of the reservoir in 3 wells (Muzhil-4, 7, and 8). The output of the ISML plot is applied in integration with the vertical plot of the porosity (∅), permeability (k), and effective pore radius (R35) against depth to measure the efficiency of each HFU contribution to the total flow capacity of the Matulla reservoir, and to delineate the main attributor to the flow capacity. It is indicated that the Matulla sandstone reservoirs can be subdivided into 7 HFUs to the NW of the field, while it is subdivided into four and five HFUs in the center and to the SE of the field; i.e., its heterogeneity increases to the NW at Muzhil-7 well. On the other side, the best reservoir quality is assigned to the southeast at Muzhil-4 well (av. ∅ = 20.8%, av. k = 596.6 md, and R35 = 12.1 μm). The efficiency of the obtained HFUs was estimated and described both mathematically and graphically. Also, the measured porosity and permeability values indicate relatively low reservoir properties to the NW of the field. The reservoir heterogeneity is also measured using the Dykstra-Parsons technique which indicates extremely high heterogeneity (0.89 ≤ V ≤ 0.98).