Free Vibration of Flax Braided Fabric PLA Beam under Edge Compression

Abstract

The present study focuses on the development of biodegradable composites to replace synthetic polymer-based composites for potential lightweight structural applications in the automobile, aeronautical, marine, and packaging industries. Initially, PLA and NFBF/PLA films are prepared by solution casting, and from these films, composite laminates are prepared by film sequencing and compression (hot-press) molding methods. First, the critical buckling load (Pcr) of composites is analyzed, and then, the influence of compressive load on natural frequency is studied. The critical buckling load-bearing capacity of PLA is enhanced with the reinforcement of NFBF (natural fiber braided yarn fabric). The composite with three layers of NFBF registered the highest critical-buckling load (Pcr) of 374.19 N, and this value is 172.13% high compared to the virgin PLA. Similarly, the natural frequency of the NFBF composites approaches minimum when the applied load is equal to the corresponding Pcr. However, a significant increase in the fundamental frequency is noticed when the applied load is higher than the Pcr.

Keywords

• braided yarn fabric
• pla
• buckling strength
• free vibration
• natural frequency
• biocomposite