Applied Sciences (Feb 2023)
Monitoring of Engineered Stones Used in Artwork Reproductions: Mechanical Characterization by Laser Vibrometry
Abstract
Many museums have been producing reproductions for several years to replace artworks weakened by outdoor exhibition. Among these, in order to imitate the original aesthetic, the French consortium Réunion des Musées Nationaux–Grand Palais has chosen to work from large-format marble sculpture molds to complex composite materials based on resins comprising mineral fillers. However, similar to the original works of art, these reproductions age and deteriorate due to constant outdoor exposure. For this reason, current research focuses on the preventive conservation and monitoring of the structural health of these reconstructed objects. The goal of this paper was to study the resin/mineral powder composite materials used to produce cultural heritage reproductions of sculptures. This work is oriented toward a comparison of the mechanical properties of composite materials used in the replacement of cultural heritage sculptures (for instance, in the Garden of the Palace of Versailles or the Rodin Museum). The objectives were to first characterize the physical and mechanical properties of these materials in order to identify the most suitable material for cultural heritage reproduction, and secondly, to propose a method with minimal contact that obtained equivalent information as analyses performed with conventional ultrasonic techniques. These nondestructive evaluation techniques could be used for laboratory and in situ analyses. Samples of different polymer/mineral powder filler compositions were analyzed by compressional, shear and surface waves, generated by a 1 MHz center frequency ultrasonic transducer. Firstly, the measurements made it possible to evaluate the velocities of the bulk acoustic waves and extract the Young’s modulus of each tested material. Secondly, in order to have minimal contact with the analyzed structure, a laser interferometry system was used to detect waves at the surface and follow their propagation. The results clearly showed the possibility of using this technique to extract mechanical characteristics of composite materials, allowing for selection of material for the reproduction of large-format statues. For different types of polymer resins, the ability of ultrasonic analysis to track the impact of rock powder (marble or slate) on the mechanical properties of these synthetic materials was clearly observed, proving that this technique holds promise for monitoring the structural health of large-format artwork.
Keywords