Advances in Mechanical Engineering (Dec 2020)

Evaluation and improvement of tire rolling resistance and grip performance based on test and simulation

  • Chen Liang,
  • Haowen Li,
  • Hoda Mousavi,
  • Guolin Wang,
  • Kangying Yu

DOI
https://doi.org/10.1177/1687814020981173
Journal volume & issue
Vol. 12

Abstract

Read online

In order to clarify the contradictory mechanism between tire rolling resistance and grip performance, ten (10) 205/55 R16 radial tires with different tread patterns were selected as the research objects. Using VIC-3D non-contact strain measurement system, the pattern deformation in the contact area under vertical load was tested and the relevant deformation parameters of the contact area were extracted. Correlation analysis was used to establish the relationship between the identified deformation parameters and tire performance indicators. Then the contradiction mechanism between tire rolling resistance and grip performance was identified. The mechanism is such that, in order to improve the grip performance of the tire, it is necessary to reduce the transverse tensile strain of the tread in the contact area and increase the longitudinal tensile strain of the tread, but with the increase of the longitudinal tensile strain, the rolling resistance of the tire will also increase, which leads to the contradiction between tire rolling resistance and grip performance. In order to better understand and solve this contradiction, a finite element model of 205/55R16 tire with complex pattern was established. The influence of the number and width of transverse grooves in outer shoulder area on tire rolling resistance and grip performance was analyzed by numerical simulation, where it was identified that, the longitudinal tensile deformation of the tread is the main cause of contradiction between the two performances. An optimized design of concave transverse groove with narrow groove in the middle and wide groove at both ends was proposed in the outer shoulder area to resolve the contradiction. Compared with the original scheme, the rolling resistance of the optimized scheme was reduced by 2.112 N, and the grip force saw an increase of 10.196 N, and thus delivering a cooperative improvement of tire rolling resistance and grip performance.