Scientific Reports (May 2024)

On characteristics of K 0 value and shear behaviour of loess using triaxial test

  • Xin Liu,
  • Xinyu Xu,
  • Liang Huang,
  • Xiao Wei,
  • Hengxing Lan

DOI
https://doi.org/10.1038/s41598-023-42248-1
Journal volume & issue
Vol. 14, no. 1
pp. 1 – 10

Abstract

Read online

Abstract Compared with conventional soils, such as sand and clay, little knowledge on the coefficient of lateral earth pressure at-rest (K 0) has been established for loess in the current literature. This paper presents an experimental investigation on K 0 of compacted loess and the associated impacts on undrained shear behaviour. By adopting a K 0 consolidation module in the triaxial system, the K 0 stress state for loess samples was achieved through a unique feedback control. During the K 0 consolidation, the deviatoric stress (q) increases progressively with the premise that the volumetric strain (ε v) of the sample equals to the axial strain (ε a). The results show that the K 0 value of compacted loess is in a range of 0.28 to 0.53, which is dependent on the packing density and the clay content. A distinguishable decrease of K 0 was found in the course of K 0 consolidation for the loosely compacted loess sample, whereas a similar trend was not observed in the dense sample. In the undrained shear stage, all loess specimens revealed contractive response in the stress path (q-p’) diagram, which can be quantified by a modified collapsibility index (I c). The index is consistently higher for the K 0 consolidated loess samples than for the isotropic ones. The experimental results indicate a strong impact of the initial stress state on the shear behaviour of compacted loess.