Geoscientific Model Development (Nov 2023)

Overcoming computational challenges to realize meter- to submeter-scale resolution in cloud simulations using the super-droplet method

  • T. Matsushima,
  • S. Nishizawa,
  • S. Shima,
  • S. Shima

DOI
https://doi.org/10.5194/gmd-16-6211-2023
Journal volume & issue
Vol. 16
pp. 6211 – 6245

Abstract

Read online

A particle-based cloud model was developed for meter- to submeter-scale-resolution simulations of warm clouds. Simplified cloud microphysics schemes have already made meter-scale-resolution simulations feasible; however, such schemes are based on empirical assumptions, and hence they contain huge uncertainties. The super-droplet method (SDM) is a promising candidate for cloud microphysical process modeling and is a particle-based approach, making fewer assumptions for the droplet size distributions. However, meter-scale-resolution simulations using the SDM are not feasible even on existing high-end supercomputers because of high computational cost. In the present study, we overcame challenges to realize such simulations. The contributions of our work are as follows: (1) the uniform sampling method is not suitable when dealing with a large number of super-droplets (SDs). Hence, we developed a new initialization method for sampling SDs from a real droplet population. These SDs can be used for simulating spatial resolutions between meter and submeter scales. (2) We optimized the SDM algorithm to achieve high performance by reducing data movement and simplifying loop bodies using the concept of effective resolution. The optimized algorithms can be applied to a Fujitsu A64FX processor, and most of them are also effective on other many-core CPUs and possibly graphics processing units (GPUs). Warm-bubble experiments revealed that the throughput of particle calculations per second for the improved algorithms is 61.3 times faster than those for the original SDM. In the case of shallow cumulous, the simulation time when using the new SDM with 32–64 SDs per cell is shorter than that of a bin method with 32 bins and comparable to that of a two-moment bulk method. (3) Using the supercomputer Fugaku, we demonstrated that a numerical experiment with 2 m resolution and 128 SDs per cell covering 13 8242×3072 m3 domain is possible. The number of grid points and SDs are 104 and 442 times, respectively, those of the highest-resolution simulation performed so far. Our numerical model exhibited 98 % weak scaling for 36 864 nodes, accounting for 23 % of the total system. The simulation achieves 7.97 PFLOPS, 7.04 % of the peak ratio for overall performance, and a simulation time for SDM of 2.86×1013 particle ⋅ steps per second. Several challenges, such as incorporating mixed-phase processes, inclusion of terrain, and long-time integrations, remain, and our study will also contribute to solving them. The developed model enables us to study turbulence and microphysics processes over a wide range of scales using combinations of direct numerical simulation (DNS), laboratory experiments, and field studies. We believe that our approach advances the scientific understanding of clouds and contributes to reducing the uncertainties of weather simulation and climate projection.