Properties Prediction of Linear Block-Polyurethanes Based on the Mixtures of Simple Oligoethers

Abstract

Polyurethanes are materials usable in wide spectrum of applications. This article is aimed at the properties tailoring of selected polymers by an alteration in initial materials. To achieve that goal, we proposed form the polyurethane matrix by mixing materials that have a different ratio of the initial components. Mathematical model has been developed that describes relationship of structure and strength, deformation, rheological and tribotechnical characteristics of linear block-polyurethanes based on oligoether blends. Oligoethers blend samples were obtained by injection moulding on an automatic thermoplastication machine with varying proportions of the starting components over the whole concentration range. A significant change of properties over the whole concentration range was observed and compositions with unique combination of characteristics have been determined. Obtained dependencies allow to predict the composition of the binary mixture with a tailored level of strength, deformation, rheological and tribotechnical characteristics. The obtained results are fully consistent with the practical experience of processing and exploitation of initial polyurethanes.

Keywords

• linear block-polyurethane
• oligoether
• physico-mechanical characteristics
• melt flow characteristics
• melt flow
• wear intensity
• material quality indicator