New Segmented Poly(Thiourethane-Urethane)s Based on Poly(ε-Caprolactone)Diol Soft Segment: Synthesis and Characterization

Abstract

New segmented poly(thiourethane-urethane)s (SPTURs) were synthesized by the reaction of 1,1′-methanediylbis (4-isocyanatocyclohexane) (Desmodur W®, HMDI) and poly(ε-caprolactone)diol (PCL) and (methanediyldibenzene-4,1-diyl)dimethanethiol as nonconventional polymer chain extender. FTIR spectroscopy was used for the structural analysis of obtained polymers. The molecular weight distribution was examined by GPC chromatography. Based on the measured contact angles, free surface energy parameters were calculated. Thermal properties of polymers were examined by DSC and TGA, while viscoelastic properties were measured by DMTA. The tensile, adhesive and optical properties were also investigated for the obtained polymers. It was shown that SPTURs were transparent or partially transparent solids with high molar masses up to 84,300 Da. These polymers showed a good resistance to hydrolysis during incubation in Optylite® physiological saline over 8 weeks. Obtained polymers possessed a tensile strength of up to 43.26 MPa, hardness of up to 96.25/59.00 Sh A/D and adhesion to copper of 14.66 MPa. The surface properties of the obtained polymers show that all obtained SPTURs were hydrophilic (CAs for water between 64.07° and 73.12°) with calculated SFE up to 46.69 mN/m.

Keywords

• transparent polyurethanes
• surface free energy
• mechanical properties
• differential scanning calorimetry
• thermoplastic polyurethanes
• optical properties