1D-2D MODELING OF URBAN FLOODS AND RISK MAP GENERATION FOR THE PART OF HYDERABAD CITY

Abstract

Space for water is now becoming guiding principle of urban planning because urban flooding is the major problem facing by most of the cities in India. Urban development in developing countries like India usually occurs with high population concentrating in small areas, with poor drainage conditions. People occupy floodplain areas in low flood years and when larger flood occurs it causes high damage. The origin for urban floods is floodplains encroachment and unplanned drainage systems. Complexities in the urban environment and drainage infrastructure have an inherent influence on surface runoff. This runoff generates urban flooding which poses challenges to modeling urban flood hazard and risk. As like in river flooding satellite images are not available for unban flooding scenario. So better modelling provides minimizing loss of life and property. The present study focuses on recognizing the highly effected areas which are liable to flooding when extreme rainfall occurs for part of Hyderabad city (Zone XIII). The entire Hyderabad city is divided into 16 zones and each zone having details of existing drain network. A coupled 1D-2D flood modelling approach is used to identify flood prone areas and develop flood inundation and flood risk maps. 1D model for pilot area is developed using storm water management model (SWMM) and coupled with 2D PCSWMM. A web based GIS platform INPPINS is used to geo reference the existing network details and exported to 1D SWMM model. The model is simulated for extreme flood event occurred in past. The simulation run results identifies overflowing drainage nodes and flood inundation maps and risk maps prepared. The flood risk maps identify the low lying areas which need immediate attention in case of emergency. The overflowing nodes suggest the need of improvement of drainage in the area to safely dispose of the storm water and minimize the flooding.