Shedding Light on Gas-Dynamic Effects in Laser Beam Fusion Cutting: The Potential of Background-Oriented Schlieren Imaging (BOS)

Abstract

In laser beam fusion cutting of metals, the interaction of the gas jet with the melt determines the dynamics of the melt extrusion and the quality of the resulting cutting kerf. The gas-dynamic phenomena occurring during laser beam cutting are not fully known, especially regarding temporal fluctuations in the gas jet. The observation of gas and melt dynamics is difficult because the gas flow is not directly visible in video recordings and access to the process zone for observation is limited. In this study, the problem of imaging the gas jet from the cutting nozzle is addressed in a novel way by utilizing the striation pattern formed at the cutting kerf as a background pattern for background-oriented Schlieren imaging (BOS). In this first feasibility study, jets of different gas nozzles were observed in front of a solidified cutting kerf, which served as a background pattern for imaging. The results show that imaging of the characteristic shock diamonds of cutting nozzles is possible. Furthermore, the resulting shock fronts from an interaction of the gas jet with a model of a cutting front can be observed. The possibility of high-speed BOS with the proposed method is shown, which could be suitable to extend the knowledge of gas-dynamic phenomena in laser beam fusion cutting.

Keywords

• laser beam fusion cutting
• laser material processing
• process observation
• high-speed imaging
• Schlieren imaging
• background-oriented schlieren (BOS)