Perpendicular Mechano-Sorptive Strains during Moisture Desorption from Eucalyptus nitens Specimens

Abstract

The purpose of this paper was to determine the mechano-sorptive strains produced during desorption of moisture from Eucalyptus nitens specimens, from a perspective of modeling wood drying stresses. Eucalyptus nitens samples were tested in the radial and tangential directions. The mechano-sorptive strain was measured by cantilever bending during desorption. The runs were performed in a conditioning chamber at constant low temperature and variable equilibrium moisture content. Four load levels were considered for testing. The results showed that the mechano-sorptive strain during desorption of moisture was proportional to applied stress and reached the maximum value in the tangential direction. Also, the mechano-sorption coefficient depended on wood orientation and reached the maximum value of 5.46 × 10-2 in the tangential direction.

Keywords

• Drying stresses
• Cantilever bending
• Drying deformations
• Mechano-sorption coefficient