Compression Creep Characteristics of Crushed Sugarcane End-Leaves
Ming Lei,
Junlei Lei,
Jiawei Luo,
Jia Wang,
Zhuo Li,
Binsheng You
Affiliations
Ming Lei
Key Laboratory of Advanced Manufacturing and Automation Technology(Guilin University of Technology), Education Department of Guangxi Zhuang Autonomous Region, Guilin, China, 541006; Guangxi Engineering Research Center of Intelligent Rubber Equipment (Guilin University of Technology), Guilin, China, 541006; College of Mechanical and Control Engineering, Guilin University of Technology, Guilin, 541004, P. R. China
Junlei Lei
Key Laboratory of Advanced Manufacturing and Automation Technology(Guilin University of Technology), Education Department of Guangxi Zhuang Autonomous Region, Guilin, China, 541006; Guangxi Engineering Research Center of Intelligent Rubber Equipment (Guilin University of Technology), Guilin, China, 541006; College of Mechanical and Control Engineering, Guilin University of Technology, Guilin, 541004, P. R. China
Jiawei Luo
Key Laboratory of Advanced Manufacturing and Automation Technology(Guilin University of Technology), Education Department of Guangxi Zhuang Autonomous Region, Guilin, China, 541006; Guangxi Engineering Research Center of Intelligent Rubber Equipment (Guilin University of Technology), Guilin, China, 541006; College of Mechanical and Control Engineering, Guilin University of Technology, Guilin, 541004, P. R. China
Jia Wang
Key Laboratory of Advanced Manufacturing and Automation Technology(Guilin University of Technology), Education Department of Guangxi Zhuang Autonomous Region, Guilin, China, 541006; Guangxi Engineering Research Center of Intelligent Rubber Equipment (Guilin University of Technology), Guilin, China, 541006; College of Mechanical and Control Engineering, Guilin University of Technology, Guilin, 541004, P. R. China
Zhuo Li
Key Laboratory of Advanced Manufacturing and Automation Technology(Guilin University of Technology), Education Department of Guangxi Zhuang Autonomous Region, Guilin, China, 541006; Guangxi Engineering Research Center of Intelligent Rubber Equipment (Guilin University of Technology), Guilin, China, 541006; College of Mechanical and Control Engineering, Guilin University of Technology, Guilin, 541004, P. R. China
Binsheng You
Key Laboratory of Advanced Manufacturing and Automation Technology(Guilin University of Technology), Education Department of Guangxi Zhuang Autonomous Region, Guilin, China, 541006; Guangxi Engineering Research Center of Intelligent Rubber Equipment (Guilin University of Technology), Guilin, China, 541006; College of Mechanical and Control Engineering, Guilin University of Technology, Guilin, 541004, P. R. China
The creep behavior of crushed sugarcane end-leaf (SEL) was studied, with consideration of different loading force, moisture content, and feeding amount. Statistical analysis software was used to develop and fit the regression data to a strain change law as a function of time. The four-element Burgers model was used. A further goal was to analyze the effect of different test conditions on the fitted creep characteristic parameters. The instantaneous elasticity coefficient E0 was found to increase when the loading force increased; the value of delayed elasticity coefficient E1 increased and the value of cohesion coefficient η0 decreased when the feeding amount increased; the value of delayed elasticity coefficient E1 and cohesion coefficient η0 decreased when the moisture content was increased. Therefore, the loading force, moisture content, and feeding amount of crushed SEL all affected the creep capacity of crushed SEL in compression. The results can provide substantial theoretical reference for the silage production of crushed SEL.
