Effect of Silica, Activated Carbon, and Alumina Supports on NiMo Catalysts for Residue Upgrading

Abstract

The effect of different supports such as silica (SBA-15), activated carbon (AC), and mesoporous alumina (Al2O3) on catalytic activities of hydrotreating nickel molybdenum (NiMo) catalysts was demonstrated for upgrading vacuum residue. Nitrogen adsorption-desorption analysis showed that SBA-15 and the AC-supported NiMo catalyst possessed a very high surface area compared to the alumina-supported catalyst. However, NiMo/Al2O3 catalyst possesses a higher pore diameter and pore volume with an appropriate surface area. X-ray diffraction (XRD) analysis showed that active metals were dispersed in the catalytic supports. Transmission electron microscopy (TEM) analysis revealed the presence of type II active MoS2 sites in the NiMo/Al2O3 catalyst, which showed weak metal-support interactions having a high intrinsic activity. Catalyst activities such as hydrodesulfurization (HDS), hydrodemetallization (HDM) and asphaltene conversion (HDAs), and hydrocracking conversions of a vacuum residue were evaluated. The highest hydrotreating and hydrocracking conversions were observed with the NiMo catalyst supported on mesoporous alumina. The results also supported that the catalyst that has a large pore diameter, high pore volume, and better active metals dispersion is highly desirable for the upgrading of a vacuum residue.

Keywords

• SBA-15
• mesoporous alumina
• activated carbon
• NiMo catalysts
• vacuum residue
• hydrotreating