Fabrication and mechanical properties of Bi-added Ti–Cr alloys for biomedical applications

Abstract

The potential of the Bismuth (Bi) addition was evaluated for the development of biocompatible metastable β (bcc) Ti alloys from the viewpoints of mechanical properties and phase stability. The basic alloy was Ti–5 mol% Cr, and 0–9 mol% Bi was added in nominal composition. A Ti–Bi binary alloy was also selected. The alloys were fabricated using a standard laboratory-scale arc melting machine under an Ar atmosphere. The weight loss was significant during melting due to Bi evaporation. The measured Bi content is linearly proportional to the Bi nominal composition with MCBi = 2/3 NCBi, allowing the prediction and control of Bi content of the alloy. Then, the microstructure, workability, and mechanical properties were systematically investigated. The phase constitution of the Ti–5Cr binary alloy was β + α′ (hcp) + ω (hexagonal). The presence of the athermal ω phase resulted in significantly poor cold workability and poor ductility. It was also found that the addition of Bi to the Ti–5Cr alloy stabilized the β phase and suppressed the ω phase formation. The phase stability of Ti–Cr–Bi alloy is discussed using Mo equivalent and electron-to-atom (e/a) ratio. Ti–5Cr–1.6Bi alloy showed improved workability and ductility. However, with further increasing Bi addition, the Ti–5Cr–3.7Bi alloy showed no plastic deformation, and the Ti–5Cr–6.1Bi alloy was broken even during hot-rolling. Thus, it is concluded that ∼2 mol% Bi addition is suitable and that such a small amount of Bi addition is an attractive candidate for the development of β Ti alloys.

Keywords

• Bi addition
• Microstructure
• Mechanical properties
• ω phase
• Ti–Cr alloy
• Workability